"Oxy - Out 200"
COMPLETELY CONTROLS DISSOLVED OXYGEN
PREVENTS PITTING AND RUSTING IN BOILERS
ECONOMICAL TO USE
IDEAL FOR MOST BOILER SYSTEMS
EASY TO DISSOLVE
Davies “ OXY-OUT #200”has been used effectively for treating corrosion/dissolved oxygen in large boiler systems for many years. “OXY-OUT #200” is a concentrated powder oxygen scavenger that is ideal for very large boiler systems, or those with a major dissolved oxygen problem. Dissolved oxygen causes hazardous pitting and rusting in boiler systems. It is important that complete testing be done on all boilers. Dissolved oxygen enters the boiler with raw make-up water, through any air leaks, and through improper pump seal packing. Although we recommend the use of a water softener for boiler make up water due to the highly corrosive nature of soft water that will shorten boiler life, it is essential that “OXY-OUT #200” be used to control dissolved oxygen and help protect against corrosion.
The degree of “OXY-OUT #200” treatment will indicated by size and condition of the boiler systems, water conditions, boiler work load, etc. “Oxy-Out 200” should be pre-dissolved in hot water before addition to the boiler. Prepare this stock solution by adding one (1) pound “Oxy-Out 200” per gallon of make-up water. One gallon of this stock solution will adequately treat about 700-800 gallons of feed water.
“OXY-OUT #200”can be readily tested using the Davies’ Oxygen Scavenger Test Kit.