"Spatter-Mask" is a non-viscous liquid that can be easily sprayed or brushed on surfaces to be welded. Application is very easy and fast, due to the controlled consistency of the product, with less waste compared to conventional pastes or aerosols.

"SPATTER-MASK", the Aerosol, features the outstanding properties of the original "SPATTER-MASK", and the convenience of aerosol packaging. The unique composition of "SPATTER-MASK", the Aerosol, is that unlike the standard aerosols on the market, no hazardous components are added.

Measured Tablets Stop Bacteria Growth in Metal Working Fluids
Davies "Bacteria-Ban #325 Tablets" prevents the growth of those microorganisms (bacteria) which cause rancidity in metal working fluids, especially oil based products.

Bactericide for Metal Working Fluids
Davies "Bio-Treat 300" is a highly effective bactericide designed for machining fluid sump application.

DAVIES ‘Contact & Circuit Board Cleaner’ is a highly effective blend of solvents that are fast drying, non-conductive and safe to use on plastics, rubber and metal.

Natural Cleaning Solvent
Davies "Enviro-Sol 440" features strong solvent action, with all-natural ingredients. As this solvent blend is extracted from natural sources, they are fundamentally safe for the environment, and are completely biodegradable. “Enviro-Sol 440” is an ideal solvent to use outdoors, where product may contact the ground.

Strong Solvent-Based Glue Remover
Davies "GLUE-X" is highly effective in removing adhesives used to apply rubber backed carpeting, asphalt tile, etc. to subflooring. Will not adversely affect concrete. Easy to use.
Apply "Glue-X" via cloth, allow to soften the adhesive for several minutes, and remove with dampened cloth. Some brushing may be necessary to remove severe adhesives. Always wear solvent resistant gloves and have adequate ventilation while using "Glue-X".

Rust Inhibited Industrial Cleaner & Degreaser
A high-powered, super-concentrated liquid degreaser that outperforms ordinary industrial cleaners.
DIRECTIONS - Dilution is directly dependent on temperature soil severity, and cleaning conditions. At room temperature, dilute 1:8. For Optimum cleanings, heat to 120° F and dilute 1:15. Steel parts clean with "Grease-Off 150" are protected with a water-soluble rust inhibitive film, and should not be rinsed following cleaning. Dilute 1:10 when using as sump cleaner in machine sumps; circulate as necessary, drain and rinse.

Industrial Cleaner & Degreaser
A high-powered, super-concentrated liquid degreaser that outperforms ordinary industrial cleaners.

Industrial, Institutional, Cleaner Degreaser
Davies "Grease-X" combines top cleaning features with a most economical price. "Grease-X" costs the same as the economy cleaner degreasers, but leaves them behind in cleaning power.

Industrial Cleaner, Phosphatizer
Davies "Iron-Kote 320" is a most effective cleaner, phosphatizer. It is mixed with hot water and applied via pressure washer or steam cleaner onto ferrous metal surfaces.

Industrial Cleaner, Phosphatizer Concentrate
Davies "Iron-Kote 340" is a most effective cleaner, phosphatizer. It is mixed with hot water and applied via pressure washer or steam cleaner onto ferrous metal surfaces.

Condenser Coil Cleanser
"Koil-Brite" is a special blend of acids and penetrating agents for coil cleaning that will immediately dissolve and clean all contaminates from inner coils with foaming action that pushes outward allowing both surfaces of coils be clean simultaneously. It is not harmful to equipment.

Evaporator Coil Cleaner
"Koil-Kleen" is especially made for cleaning A/C evaporator coils of any size. "Koil-Kleen" will mix with condensate, eliminating slime, dirt and lint through the condensate area and is thoroughly rinsed off by the condensate water.

Industrial Multi-Metal Cleaner
Temperature: Hot water (120° -160° ) is recommended for faster and more thorough cleaning. However, "MMC-20" is also effective at room temperature.

PH Neutral Industrial Cleaner
Davies "Metal-Kleen #200" is a highly concentrated industrial cleaner, specifically designed to have a neural pH but has outstanding soil penetration and suspension capabilities.

Davies "Paint Prep 100" is a most effective cleaner/phosphatizer.
Davies "Paint Prep 100" is a most effective cleaner/phosphatizer. Medium shop oils and soils are removed with fast cleaning action.

Davies “PAINT PREP 320” is mixed with hot water and applied via pressure washer or steam cleaner onto ferrous metal surfaces. Medium shop oils and soils are removed with the cleaning action and a sturdy, phosphate coating remains on the surface, providing an ideal base for positive paint adhesion.

Davies ‘SAW-KLEEN’ offers fast acting cleaning of resins, pitch, carbon, etc; from steel saw blades, in an efficient and economical water dilutable form.

Heavy Duty Dip Tank Cleaner for Steel
"Soak-Kleen" 255-M is a general purpose soak cleaner for steel, with excellent cleaning ability. "Soak-Kleen" 255-M emulsifies soils and greases so they don’t redeposit on the cleaned work. It also is an extremely free-rinsing product.

Metal Working Machine Sump Cleaner
Davies "Sump-Aid" is strong medicine for heavily soiled, odorous machine sumps. Special cleaners and pentrants quickly attack and remove tramp oil, swarf, and other typical machine sump soils.

Vibratory Finishing Compound
Davies "DeBurr #255" represents a quality, general use compound for vibratory finishing and other mass finishing processes. This product boasts of outstanding cleaning and corrosion protection, with proper foam levels.

Davies “DEEP-DRAW 810-6” is a high viscosity oil-system, designed to out-perform conventional heavy weight oils. A unique blend of high-performing additives allows for use in extreme draws, heavy stock, or multiple strike operations.

For Auto and Truck Chassis and Repair Parts
Davies "Dip Tank Compound" No. 100 is a fast acting concentrate. Oil and Dirt is quickly loosened due to specially developed penetrant. Davies "Dip Tank Compound No. 100 is free from all fumes.

No. 100 Aluminum Corrosion Inhibitor
Davies "ACI-l00" is an ideal product for any aluminum die cast manufacturer. Using "ACI-100" solution following any water contact operation, such as machining, washing, etc. prevents white rust formation.

"Burnishing Compound #100" concentrates biodegradable blend of high quality coconut oil amine condesate modified with a carefully selected amine chelate. "Burnishing Compound #100" is sold to chemical manufacturing companies for formulating lubricants and as a corrosion inhibitor in many varied applications.

A penetrating oil that protects against corrosion; drives away dirt, grime, caked grease and oil; and lubricates to ensure friction free operation.

Heavy Duty Rust Remover ConcentrateDavies "Rust Remover 755" is a unique blend of acids, detergents, and selected activators designed to remove heat treat scale or simple rust from carbon steel, cast iron, or powder metal composite parts.

Water Dilutable Rust Preventative Concentrate
Davies "Rust-Guard 252" is a concentrated, water dilutable, rust inhibitor with many special features. Its high concentration allows up to 1:40 dilutions, and an easy to use test kit is available for accurate testing.

Long Term Corrosion Inhibitor
DIRECTIONS – The recommended procedure for application is with an agitated immersion process. This allows for total coverage and displacement of entrapped air or hidden surfaces. Good rust protection can be realized via spray application. This is the most common procedure used with very large items. For best results, let treated parts air dry before handling. "Rust-Proof 305" is used as is, without dilution.

Long Term Indoor/Outdoor Corrosion Inhibitor
Davies "Rust-Proof #500-S" is a blend of selected inorganic and organic rust preventative coupled with a special micro-crystalline wax that offers outstanding rust protection. Spray, dip, or brush application produces a firm, was like coating that is ideal for outdoor, as well as indoor storage.

Long Term Corrosion Inhibitor
Davies "Rust-Proof 700" is a highly successful corrosion inhibitor designed for long term rust protection under variable conditions. "Rust-Proof 700" is the product of choice for manufacturers who ship parts over seas that are partially protected from the elements.

High Performance Industrial Defoamer
Davies "Foam-X A-115" offers the best of current technology in effective foam control. This product offers essentially spontaneous foam knockdown and excellent hold-down (after reagitation).

A highly concentrated greaseless lubricant base with built-in glycerized rust –inhibitor and foam retarder. Merely add water to this base to make an economical liquid lubricant. Works effectively under all water hardness conditions, speed, machine temperatures, and carbonation. Reduces glass breakage, chain-drag, toppling, and many other bottle-line troubles.

A penetrating oil that protects against corrosion; drives away dirt, grime, caked grease and oil; and lubricates to ensure friction free operation.

Davies "Deep-Draw 150" low viscosity drawing oil is designed to replace the conventional heavy weight oils.

Davies "Deep-Draw 155" low viscosity (435 sus) drawing oil is designed to replace the conventional heavy weight (1400 sus and greater) oils. A unique blend of oils and additives allows for the use of a thinner oil even in multiple strike operations.

Silicone Pump-Spray Lubricant
"Super-Glide" lubricates weather stripping, auto door seals, window channels, emergency brakes, power windows, and carburetor linkage. Winter treatment prevents freezing of door locks, handles, and trunk lids. Many molding applications can use "Super-Glide" as an effective and low-cost mold release agent. For a most effective aerosol alternative, Davies "Sure-Shot" portable sprayers can be used.

Flood Lubricant for Aluminum, Zinc
Davies "Thread & Tap Oil No. 125" is an ideal flood lubricant for severe machining operations on Aluminum, Zinc Die cast, and other metals. The outstanding lubricity and EP (extreme pressure) additives, enable soft metal machining to excellent finish.

Heavy Duty Machining Lubricant
Davies "Tuff-Kut 725" is an ideal flood lubricant for severe machining operations on multi metals.

"Ultra-Lub" is a concentrated lubricant having experienced very wide acceptance in industry as a very high quality lubricating agent and most economical to use due to being a concentrate for user to add their own water.

Non-Residual, Spray-Mist Machining FluidsD. W. Davies & Co., Inc. has a complete line of "Vanishing Oils" which are used for spray-mist or roller applications for various machining and forming operations. These products are not used in recirculating sump application, but are sprayed or mist applied, or drip roller applied directly to the point of machining. These products are aptly named, as they cool and lubricate, but then evaporate, ‘vanish’ without leaving residual on the machined surface.

Way-N-Slide #250 has the same boundary lubrication and anti-wear properties as #100 but has additional EP (extreme pressure) additives for severe machining applications.

Davies “Aluma-Tap #120” is an outstanding machining fluid for aluminum. To obtain proper machining and finish on this and other difficult to machine metals, a fluid with high lubricity and cooling is required and “Aluma-Tap #120” fills the bill.

Heavy Duty All-Purpose Metal Working Fluid
"Kutsol 100" is a premium oil base, all-purpose metalworking fluid, designed for a multitude of metalworking operations such as tapping, surface broaching, reaming, boring, milling, turning, sawing and grinding, etc.

Heavy Duty Semi-Synthetic Machining Fluid
Davies "Kutsol 200" represents the forefront of machining fluid technologies. The finest qualities of soluble oils and synthetic systems are incorporated one package to create a premium machining coolant.

General Purpose Metal Working Fluid
"Kutsol 500" is a soluble oil metal working fluid. It is designed for those where economy of price versus manufacturing cost is of prime concern. "Kutsol 500" does not contain the premium extreme pressure or lubricity additives found in "Kutsol 100" and "Kutsol 300". It is recommended that "Kutsol 500" be used in light to moderate machining operations and not on harden steels, stainless steels or exotics.
DIRECTIONS – Dilutions of 1:10 to 1:30 are possible with "Kutsol 500", depending on the machining operation. The best way to determine the right dilution is through the actual field trial.

DAVIES “KUTSOL 260” represents the forefront of machining fluid technologies. The finest qualities of soluble oils and synthetic systems are incorporated into one package to create a premium machining coolant.

DAVIES “KUTSOL 296” represents the forefront of machining fluid technologies. The finest qualities of soluble oils and synthetic systems are incorporated into one package to create a premium machining coolant.

Metal Working Fluid Extender
Davies "Long-Kut" is an effective additive that helps to extend metalworking fluid life. This results in savings of fluid, labor, etc. "Long-Kut" is effective in both synthetic and soluble oil systems.

All Purpose Synthetic Machining Fluid
Davies "Lubra-Kool", a synthetic machining lubricant, is designed to cover a wide spectrum of machining applications. Machining operations, such as milling, drilling, cutting, etc. all apply to "Lubra-Kool".

The D. W. Davies & Co., Inc. , has a most complete line of machining fluids, both synthetic and soluble oil. There are many application overlaps where several products could be appropriate; these circumstances are generally settled by customer preference. Our "Kutsol" products are soluble oil concentrates, designed to give outstanding lubricity, surface finish and rust protection. Our synthetic products are "Mira-Kool" (grinding, misting) and "Lubra-Kool" (general machining). Soluble oils have more lubricity than synthetics and can produce superior surface finish at lower concentrations. Synthetics do not contain oils, dilute to clear solutions, are easily disposable and, if not contaminated, can be discharged to drains. There are brief product descriptions below and a chart to aid in product selection.

Synthetic Grinding Coolant
Davies "Mira-Kool 100" is an excellent all-purpose synthetic grinding fluid. This hybrid blend has been designed for all types of grinding including surface, blanchard and centerless.

Parts cleaners and hot water-based cleaning fluids are today’s better alternatives to chlorinated solvents.

Davies “LEAK-TEST 200” is a highly effective detective in searching for hard to find leaks in weldments, piping, etc. This product is formulated in an easy to use, liquid format, which can be easily sprayed or squirted onto external surfaces.

Davies “Metal Rinse 200” is an effective rinse aid used in final rinse stages of spray and immersion wash systems.

Sock Absorbent
Plug machine leaks with a safe and cost-effective solution that doesn't damage machines like using clay would.

Davies “Slat Guard 100” is formulated to help prevent slag from sticking on metal slats on lasers.

Davies “Slat Guard HV” is formulated to help prevent slag from sticking on metal slats on lasers.

Davies “Super Green” is the ‘adult’ version to many of the trendy junior-cleaners currently on the market. This product is ‘SUPER’ on severe, tenacious soil, yet safe for operator use and sub-surface contact. “Super Green” is a true cleaner concentrate, which allows great savings in cleaning costs.

Tramp Oil Absorber
The D. W. Davies & Co., Inc. "Tramp-Pad" is specifically designed to absorb tramp oils and dissolved greases. The 18" x 18" pad will not absorb water, metal working coolants or cleaners/degreasers – that’s why it floats on the surface. Just place the "Tramp-Pad" on the fluid reservoir and let it go to work for you Some of our customers use "Tramp-Pads" in industrial washers to remove oil from the surface.
Amazingly, tramp oils and greases disappear along with a lot of other potential problems. Most importantly, the "Tramp-Pad" will help extend fluid life or improve the cleaning capacity of your degreasers.

Davies “Aluma-Tap #120” is an outstanding machining fluid for aluminum. To obtain proper machining and finish on this and other difficult to machine metals, a fluid with high lubricity and cooling is required and “Aluma-Tap #120” fills the bill.

Tapping Fluid
Apply a few drops to tool as it contacts work and as pressure build up. "Easy-Tap" immediately breaks down surface tensions and adhesions. Improves surface finish by eliminating scuffmarks, produces a cleaner, truer thread, releases stuck taps and stops tool breakage. Quick evaporation leaves a clean surface.
Do not use on aluminum or plastics.

Thick, Heavy-Duty Tapping, Threading Oil
Davies "Easy-Tap 200" is a heavy duty, tapping, threading oil, designed for manual lubricant feed. Because of its excellent lubricity and EP properties, it is ideal for most severe machining, however, it can be used for all types, including: drilling, boring, milling, turning, planing, broaching, hobbing, etc. "Easy-Tap 200" is fed either manually or with a pump sump system to point of machining. Special additives maintain boundary and integral lubricity to prevent weldment of tool to stock, thus increasing finish and tool life.
"Easy-Tap 200" is ideal for carbon steel, cast iron, tool and other hardened steel, brass and other yellow metals, stainless steel, and chrome alloys.

Davies “TRIPLE LUBE” is ideal all in one lubricant for all machine and industrial shops. It features outstanding rust penetration, much faster and more complete than any national brand. “TRIPLE LUBE” also features great rust protection, for both indoor and outdoor storage.